The TC100 Thermocouple/mV Calibrator provide
high accuracy and measurement of 10 common thermocouples, as well as mV. The TC100's accuracy of ±0.3 °C
for Type J T/Cs includes all errors, at resolutions of 0.01°C or °F in measure mode, and 0.1°C or °F in source
mode. Features including MIN/MAX recall in measure mode, three setpoints per thermocouple range, a large knob for decade control
of the output in source mode, and the ability to accept bare Thermocouple wires in addition to mini-plug inputs, makes the
TC100 an accurate, easy-to-use instrument for all your thermocouple calibration needs. Features
• High accuracy ±0.3°C (Type J T/C – all errors
combined)
• Ten (10) common T/C types plus mV (see chart below)
• Accepts both T/C mini-plug and bare
T/C wires
• Simple decade control of output
• Three (3) setpoints for each Thermocouple type
•
MIN/MAX recall in measure mode
• Input protection to 240 VAC
• Supplied in full protective rubber boot
Click Here to View Flash Demonstration of the TC-100 Thermocouple Calibrator
|
|
Specifications
Temperature scale:
ITS90
CJC Temp. Offset: ±0.05°C/°C outside of 23±5°C
Warm-up Time: 1 minute to specification
Operating
Temperature: -10°C to +55°C (14°F to 131°F)
Storage Temperature: -20°C to 70°C (-4°F to 158°F)
Power
Requirements: 9Vdc Battery, 9V alkaline; 006P/IEC
6F22/NEDA1604
Mechanical Dimensions: 5.7"
H x 3.15" W x 1.43" D (144.7 x 80.0 x 36.3 mm)
Output Voltage
Range: -10 to +75.000 mV
Resolution: 1mV
Accuracy: ±0.007 % of reading, ±5μV
Output Impedance: >1 Ohm
Input Voltage
Range: -10 to +75.000 mV
Resolution: 1mV
Accuracy: ±0.007 % of reading, ±5μV
Input Impedance: > 1 MegOhm
|
| TC100 Connector |
|
| Accepts Mini Thermocouple Connectors and Bare Wire Leads |
|
|
|
Each instrument includes include Protective Rubber Boot, Batteries, Instruction
Manual, NIST Calibration Certificate.
Download the TC100 Thermocouple Calibrator Specification Sheet
|
