|
|
 |
Hand Held Precision Current Loop Calibrator |
|
|
The LC100 Precision Process Milliamp Loop Calibrator
provides significantly extended performance when compared to many competitive calibrators. With an accuracy of 0.015% of reading,
with 0.001 mA resolution, the LC-100 has the highest accuracy in its class. Unique features, such as a "% Error" function,
which eliminates manual error calculation and allows the display of the actual versus ideal error at any calibration point,
put the LC100 way beyond similar instruments. The LC100 can simulate, power, and measure two-wire transmitters. With automatic
Step and Ramp functions, the LC100 enables remote calibration of 4 to 20mA devices.
Intuitive Interface
The LC100 Loop Calibrator
provides a highly intuitive user interface. A pair of cursor keys allows rapid selection of the decade to be modified, while
a large knob allows precise and rapid adjustment to any value needed, with immediate feedback from the LCD display. A single
MODE key cycles through and selects the source, simulate, and measure modes.
|
|
|
Click here to View a Flash Demonstration of the LC100
|
Features
Very high accuracy - ±0.015% of reading
Very high resolution - 0.001mA/0.001V
% Error function - eliminates manual error calculation
Extended adjustment range - digital knob and user-selectable decade output
allow both large and incremental (0.001mA step) output changes
Reads 0 to 28.000 VDC
Built in 250 Ohm resistor facilitates calibration of HART devices
Remote calibrations through Automatic Step and Ramp functions
Loop power measurements capability
Simulates, powers, and measures two-wire transmitters
Five preset outputs (4, 8, 12, 16, 20mA)
Fuseless input protection up to 250 VAC
Supplied in full rubber boot; optional carrying case available
LC-100 Specifications (all
specification based on 25 °C unless otherwise noted)
Input
Current Range: 0.000 to 24.000mA, -25.00
to +125.00 %
Voltage (Reading): 0 to 28 VDC
Input Protection: Fuseless, up to 250 VAC
Output
Source/Simulate Range:
0.000 to 24.000mA, -25.00 to +125.00 %
Drive Capability: Without Hart 1200 Ohm; With Hart, 950 Ohm
Loop Supply Voltage: 24Vdc
Range Select: Decade; incremental to 0.001mA steps
Resolution: 1μA
Accuracy: ±0.015%
of reading ± 2μA
Environmental
Operating Temperature: -10°C to +55°C (-14°F to 131°F)
Storage
Temperature: -20°C to +70°C (-4°F to 158°F)
Power Requirements Battery 9Vdc, one required; included,
AC Adapter optional
Mechanical
Dimensions:
5.7" H x 3.15" W x 1.43" D (144.7 x 80.0 x 3.63 mm); without
boot
Weight: 12 ounces (340gms)
|
|
Each instrument includes include Protective Rubber Boot, Batteries, Test Leads,
Instruction Manual and NIST Calibration Certificate.
Download the LC100 mA Loop Calibrator Specification Sheet
|
|
|
|
|
|
|
|
Multifunction Temperature and Process Calibrators, Thermocouple and mA Calibrators, Thermocouple and RTD Dry Block Calibrators, Portable Infrared Thermometers, Fixed Mounted Industrial Infrared Thermometers, Thermocouple and RTD 2-wire Head Mounted Transmitters, DIN Rail Mounted Thermocouple and RTD Transmitters, Temperature and Process Panel Meters, Temperature & Humidity Transmitters, Hand Held Digital Thermocouple Thermometers, MIST Microprocessor Based Integral Transmitter RTD Temperature
Sensors,
Industrial Test tools and Maintenance Kit, Indoor Air
Quality (IAQ) and Test Meters, Hand Held Humidity and Air Flow Meters, Industrial Portable
Refrigerant and Gas Leak Detection Meters, Pressure Measurement and Calibration Instruments
Temperature & Process Instruments Inc. * 1767 Central Park Avenue * Suite 112 * Yonkers
* NY * 10710
Phone: 1-914-673-0333 Fax: 1-866-292-1456 Email: sales@tnp-instruments.com© 2006 - 2010 Temperature & Process Instruments, Inc. |
|
|
|
